Appliance Installation & Service
Big Enough To Get The Job Done, Small Enough To Care
Washers, Refrigerators, Garburators
With decades of experience in the installation of appliances that require a water connection, in both new homes and older ones, our licensed professionals will ensure your appliances are installed to code.
Appliances With a Water Connection
Whether you want to update your home with new water-connected appliances or you are building a new home, our expert installers will take care of everything for you. Efficient and courteous service is one of our hallmarks and we will be happy to work with your building contractor to ensure the job is done right the first time when working with new construction.
You can count on our team to prepare and protect the site as well as unpack, inspect and prepare the new appliance for installation. If necessary, we will disconnect and remove the appliance being replaced, connect and double-check all electrical and plumbing connections and then verify the proper operation of the new appliance.
We have experience installing virtually every brand of appliance and will ensure the manufacturers’ installation specifications are followed to the letter. Our technicians have the skills, tools and parts necessary to ensure installations are done to spec.
The water and electrical connections required for these appliances should only be carried out by professionals in order to reduce risks and comply with warranty requirements. Let us handle your appliance installation. We assure your complete satisfaction with the job.
Finally, we will remove all packing material from your home and ensure that the work area is neat, clean and dry.
Appliance Installation & Service, Fridge, Washing Machine, Garburator
The Laundry Room
Though modern home styles frequently put laundry rooms on the main floor, for convenience, there are still thousands of homes throughout the Lower Mainland that have laundry rooms in the basement. Washing your clothes and bedding and so on puts a large strain on your home’s drain system. High volumes of drain water containing detergents, grease and dirt make it important to keep your laundry appliances and the drain system in good working order.
Installing a Garburator
Installing a garburator, also known as a garbage disposal, begins with removing the existing drain strainer from the kitchen sink. A mounting assembly is then secured under the sink opening using the provided hardware. The garburator unit twists and locks onto the mounting ring, creating a firm connection. The discharge tube is attached to the unit and connected to the sink drain trap, ensuring proper alignment and a watertight fit. Electrical wiring is then connected according to the manufacturer's instructions — most units simply plug into an outlet beneath the sink. Run cold water, power the unit on, and check all connections for leaks before regular use.
How to Install a Large Appliance With a Water Line
Installing a large appliance that connects to a water line, like a refrigerator with an ice maker, a washing machine, or a dishwasher, might seem intimidating at first, but with the right tools and a little patience, it is a job many homeowners can handle confidently. Here is what you need to know before you get started.
Gather Your Tools and Materials
Before anything else, make sure you have everything on hand. You will typically need an adjustable wrench, pliers, Teflon tape, a bucket, and a towel. Depending on the appliance, you may also need a copper or braided stainless steel supply line, a saddle valve or shut-off valve, and a drill. Always check the manufacturer's instructions first, as different appliances have different requirements.
Shut Off the Water Supply
- Safety comes first. Locate the nearest shut-off valve, usually found under the sink or in the basement, and turn it off completely. Open a nearby faucet to release any remaining pressure in the line. Place your bucket and towel nearby to catch any drips.
Connect the Water Supply Line
Identify the water inlet valve on your appliance, this is where the supply line will connect. Wrap the threaded fittings with Teflon tape to create a watertight seal, then hand-tighten the supply line onto both the inlet valve and the shut-off valve. Use your wrench to snug the connections, but be careful not to overtighten, as this can crack the fittings and cause leaks. Braided stainless steel lines are highly recommended over plastic ones, as they are far more durable and resistant to bursting.
Turn the Water Back On and Check for Leaks
- Slowly turn the water supply back on and watch every connection closely for drips or moisture. Run your fingers around each fitting to feel for any wetness. If you spot a leak, turn the water off again, tighten the fitting slightly, and recheck. Never ignore even a small drip, as it can cause serious water damage over time.
Position and Level the Appliance
Once you are confident there are no leaks, carefully slide the appliance into its final position. Use a level to ensure it sits evenly, adjusting the feet if necessary. A properly levelled appliance runs more efficiently and lasts longer.
Taking your time during installation and double-checking every connection will give you peace of mind and help avoid costly repairs down the road.
If this is a little beyond your DIY comfort level, call us to get this job done for you.
